Xfer Records Serum Crack v1.368.R4 Free Download 2024

Xfer Records Serum VST Crack + Serum FX + Update (VSTi, AUi) [OSX]

Xfer Records Serum Crack is a virtual Wavetable synthesizer of the top class on the market. So I have already anticipated my conclusion in the first sentence of this review, but I recommend you read the review to the end. You will find out why I drew this hasty conclusion, you will see that I was not mistaken.

Xfer Records Serum + Serum FX + Update 128b6 (VSTi, AUi) [OSX]

The xfer serum vst crack is a wavetable synthesizer with two oscillators, over 450 presets, and 140 wavetables, the plug-in is factory-equipped and supports the VST, AU, and AAX interfaces, available in both 32 and 64-bit.


When you browse the presets, the bandwidth and high-quality sound quality of the synthesizer become clear. There are nine categories to choose from: Bass, Bass, FX, Leads, Misc, Pads, Plucked, Seq, and Synth.

Even when playing the first note, the Xfer Serum 1.33b4 Crack is pleasurable. Many other software syntheses do not sound so powerful and bold until they are reworked with additional control amplifiers or effects.

The selection and bandwidth of the preset are also convincing so that you can turn around in a handy turn for your sound creation.

Here are some important names that helped create xfer serum keygen-r2r and the built-in sounds of the Serum: Francis Price, 7 Skies, Adam Szabo, CFA Sound, Steve Duda, Gigantor, ASL SoundLab, Xenox, Jordy Dazz, Derrek, Art of Fighters, P-Lask, Disko Unkle, Sounds of Revolution, and more.

Wavetable Editing

Because all the sound parameters are directly visible and controllable via the tidy user interface. The main window of serum’s latest version crack at plugin-torrent is called “OSC” and here you have the option to select the number of oscillators, assign a waveform table and add the filters to filters, and modulators, LFOs, and envelopes. The waveforms are shown here as a graphic, on request in 2D or 3D. More than 100 wavetables can be selected and edited using an editor.

FX Section

The 10-ten effects offered are quite common with modules such as distortion, flanger, chorus, delay, and reverb, but at a very high sound level. The order of the effects is flexible and almost all controls can be modulated on xfer records serum vst crack mac.

Xfer Records Serum + Serum FX + Update 128b6 (VSTi, AUi) [OSX]


All the sound parameters can be assigned to the MIDI control elements and the LFOs and Envelopes via the “Matrix” tab. This creates vivacious sounds that have almost nothing in common with their basic sounds.

Although an arpeggiator is missing, the variety of processing options leaves nothing to be desired. So, in the Matrix section, you can make all the fine tunings of your sound.


Since its release on the market, Serum VST Crack Mac has earned its respect very quickly among the producers and become one of the best software synthesizers alongside Massive, Nexus, Sylenth, Avenger, Z3bra, Omnispere, etc.

The serum keygen r2r software synthesizer is convincing all along the line. The sounds get through and sound lively and powerful thanks to the processing possibilities. If you listen to the presets, it is clear that serum is at home in every category. Whether basses, leads, or pads, the patches are bursting with fullness, force, and breadth.


The serum has a built-in wavetable editor – you can create your wavetables in different ways. Import audio directly from audio files: Serum offers a variety of methods and options for analyzing audio and splitting it into individual waveforms. Of course, you can import single-cycle wavetables, as well as multiple at once (with built-in sorting options or manual reordering).

Morph between multiple wavetables using standard linear interpolation (crossfade) or harmonic/spectral morphing. Draw directly on the waveform, with optional grid sizing and various shape tools. Generate or modify waveforms using FFT (additive). Create or process waveforms using formula functions. Render menu options allow you to do other things you want, like apply fades, crossfades, normalize, export, and more.


Wavetable playback requires digital resampling to reproduce different frequencies. Without considerable care and a lot of numerical calculations, this process will create audible artifacts. Artifacts mean that you are (perhaps unknowingly) filling your mix with unwanted tones/frequencies. Many popular wavetable synthesizers are surprisingly poor at removing artifacts, even at high-quality settings, with some creating artifacts as high as -36dB to -60dB (difference in level between fundamental artifacts) which are well audible and, in addition, they often attenuate the higher ones. . wanted audible frequencies in the process, to try and suppress that unwanted sound. In Serum, the native mode (default) playback of the oscillators works with ultra-precise resampling, resulting in an incredibly inaudible signal-to-noise ratio (e.g. -150dB on a sawtooth played at 1Khz at 44100). This is computationally intensive, so Serum’s oscillator playback has been aggressively optimized using SSE2 instructions to enable this high-quality playback without overloading your CPU more than the typical software synthesizer already does (quality decent). ). Load up the serum and we think you’ll be able to hear both what you hear (solid highs, stretching flat to the limits of hearing) and what you can’t hear (not junk muck or alias gibberish – just a good clean sound).


The modulation system allows drag-and-drop connections between modulation sources and destinations. Do you want an LFO that controls the cutoff of a filter? Simply drag the LFO title to the cutoff knob. This LFO->Filter connection will now also appear in the modulation matrix. In other words, you have two views/approaches to creating and editing your mods: sometimes a list is good, and other times you just want the job done quickly and easily.


In addition to cycling through all of the wavetables (up to 256 from a single oscillator), you can manipulate the waveform in a separate real-time process called warping. This allows FM/AM/RM/oscillator synchronization and many other ways to modify the waveform, including “Remap” modes – a graphics editor for drawing your custom table manipulations.


The serum includes all of the filter types found in LFOTool as well as a few new ones. Flangers, Phasers, and Comb filters can all follow the musical note you play. Dual filter types allow you to control or switch between filter types. Get creative with atypical processes for filters, like downsampling, or unique filter types not found before, like the dirty-sounding French LPF.


Effects rack with 10 effect modules lets you push your sound to the finish line inside Serum. Effects can be rearranged to any configuration you want. Virtually all effect parameters are also available as modulation destinations. This is especially useful for monophonic synth sounds. For example, apply an LFO to control the size of the reverb or wet/dry, or the speed to control the amount of distortion. Many of these effects and modes were created just for Serum, so there are plenty of unique effects to choose from, like Hyper, which simulates quantities

Key Features:

  • Play different frequencies using the occasional high speed. Save and create audible artifacts.
  • For instance, mix tones and frequency. Make use of a graph editor to drop and drag your tables.
  • Xfer serum keygen-r2r is easy to analyze, modify the view, modify, and examine your settings.
  • LFO control tool can be used to change the identification of LFO identify and cuts on knobs.
  • Support FM/AM/RM/Oscillator. These oscillators modify the waveform in real-time.
  • The Serum comes with exclusive filters that are available within the LFOTool. Flangers, phasers, as well as Comb filters.
  • The filters are musical. be aware.
  • Support 10 with a variety of consequences on your most important things of importance.
  • There are a variety of consequences, such as size, dry/moist, or speed-related consequences. These effects are designed for Serum.
  • A single oscillator can be used for multiple sixteen voices. These oscillators are equipped with current and most up-to-date parameters.
  • Provide a variety of unison tuning options on every available oscillator.
  • Serum VST Crack was made with the help of Xfer Records. This is synthesizer software. It produces an electronic sound.

What’s New of Xfer Records Serum?

  • The tables were not saved with audio after you erased them (except for specific tables)
  • unless you used the later DSP feature, such as Normalization.
  • When presets for effects had been downloaded (swatch or single) and graphs of waveform distortion were created
  • These were loaded incorrectly (presets weren’t affected).
  • As the van was loaded with cracker serum popup popped up asking for the size of the van to be entered.
  • It is no anymore necessary to stop and restart Active Notes when changing wave scales.
  • A thread on color schemes was added in the Serum forum for users, for instance (on
  • download).
  • The leather paint is now available in four shades

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.